Here is the simple 2 x 30W audio amplifier with STK-465 power IC. Simple circuit with higher power output, this amplifier circuit is very easy to build. Just look at the PCB layout of this circuit.. 🙂 . The active component required is just the main power amplifier chip STK-465.
Schematic diagram:
This is a stereo audio system application. A STK-465 amplifier capable to deliver 2 x 30W audio output at 8 ohm loudspeaker and 2 x 40W using 4 ohm loadspeaker.
Components list:
R1 = 1K C1 = 1uF/35V R2 = 3,3K C2 = 470pF R3 = 100 C3 = 100uF/60V R4 = 330 C4 = 100uF/60V R5 = 3,3K C5 = 10uF/60V R6 = 1K C6 = 47uF/60V | R7 = 0,33 C7 = 8,2pF R8 = 33k C8 = 0,1uF R9 = 4,7 C9 = 1uF/35V R10 = 1k C10 = 470pF R11 = 3,3k C11 = 100uF/60V R12 = 100 C12 = 100uF/60V | R13 = 330 C13 = 10uF/60V R14 = 3,3k C14 = 47uF/60V R15 = 1k C15 = 8,2pF R16 = 0,33 C16 = 0,1uF R17 = 33k R18 = 4,7 IC1 = STK465 LS1 = Speaker 40W 8 or 4 Ohm |
PCB Layout:
Component placement:
This circuit uses dual polarity power supply to work. Maximum supply voltage is 41V while the recommended supply voltage is 28V.
Sample Scheme of Dual Polarity Power Supply:
Download STK-465 datasheet You will need the datasheet for project reference.
[wpdm_file id=64]
This is the circuit diagram of power amplifier 45W using power uPC 1230 as the…
The Horn Circuit This is a basic circuit of car horn and lamp flasher that…
This is the circuit diagram of drinking water alarm based a small water sensor by…
Here is the 200W MOSFET amplifier powered based on four piece of IRFP250N, they are…
This is the 300W RMS stereo power amplifier circuit project. This amplifier is based four…
This is an active stereo tone control circuit using very well known op-amp IC of…