The following diagram is the FM tracking transmitter based on 4 transistors. No additional notes for this tracking transmitter diagram, try to discover this circuit by yourself.. 🙂 Components list: R1 = 100K Ohms R2 = 10 Ohms R3 = 47K Ohms R4 = 220 Ohms C1 = 4.7uF/16V C2, C5 = 1nF C3 =… Read More »
This is an easy FM tracking transmitter circuit project :). The scheme designed by Tony van Roon, and here the FM transmitter tracker diagram: Components List: R1 = 10K C1 = 100uF/10V C2 = 10nF C3 = 4-40pF trimmer capacitor C4 = 4.7pF IC1 = LM3909 Q1 = 2N3904 NPN transistor LED1 = Red LED/or… Read More »
Simple and easy build of sensitive FM transmitter circuit. The circuit only requires 2 transistors to work. *L1 = 0.1 Uh, 6 to 8 turns of 22 ga. hookup wire close wound around a 1/4 inch diameter non-conductive core such as a pencil Circuit Notes: Typically the default for the capacitors model is ceramic, preferably… Read More »
This circuit is a powerful three stage, 9V FM transmitter (Tx) with a range of up to 1 kilometer in the open. It uses an RF transistor in its output stage and two BC547″s for the first two stages. Distance of trans-mission is critically dependent on the operating Conditions (in a building or out on… Read More »
Here the simple and low cost FM transmitter circuit. The frequency range of this FM transmitter should be about 89MHz – 109MHz. Output power is about 9mW at 9V. Components List: Resistors: R1, R6 : 12K R2, R4 : 100K R3 : 22K R5 : 1K R7 : 100R Capacitors: C1 : 10uF/25V C2 :… Read More »
Below is the circuit diagram and PCB layout of FM wireless microphone: The range of frequencies for the FM broadcast band is 90MHz (MHz = Megahertz or 90 million cycles per second). Because the FM microphone has a variable tuned circuit, it can be tuned to a quiet spot on your local FM broadcast band… Read More »
This is long range FM transmitter with transmision power output is up to 15W. This 15W FM transmitter use power transistor BLY88C as the main transmitter amplifier. Building a good FM transmitter(88-110Mhz) begins with getting a good schematic. You don’t have to understand the precise working of the transmitter to build it. But some basic… Read More »
This is a mini fm transmitter circuit. I think this is the simplest one. Simple, easy and of course… inexpensive… The supply voltage is between 1.1 – 3 Volts with power consumption is 1.8 mA at 1.5 Volts. This circuit should be able to cover 30 – 50 meters of range max. at 1.5 Volts.… Read More »
Here the simple and low cost FM transmitter which powered using two transistors. This circuit may be tuned to operate over the range 87-108MHz with a range of 20 or 30 metres. The circuit works with 9V power supply, use regulated power supply for better quality. The coil L1 was consist of 7 turns on… Read More »