This is a low cost and easy build low powered FM transmitter. The range of the FM transmitter claimed about 300 feets when running at 9V supply. And the range claimed to be increased become about 400 feet when running it at 12V supply. Take a note that this transmitter should not be used as… Read More »
The following diagram is the FM transmitter circuit with FM transmision up to 4W. Voltage supply for this circuit is 12-16V with current consumption of 100-400mA. This circuit works with frequency of emission range of 88-108MHz. Transistor 2N2219 used as the main signal amplifier. 4 Watts FM Transmitter circuit design: Components List: R1, R2 =… Read More »
The following diagram is the schematic diagram of 4 transistors FM transmitter circuit designed by Paul K. Sherby. Components List: R1,R2,R8 = 1K R3 = 100K R4 = 150K R5,R7 = 10K R6 = 220 ohm R9 = 10 ohm P1 = 5K trimpot D1 = 1N4002 Q1,Q2 = 2N3904 Q3,Q4 = 7001, NTE123AP C1… Read More »
This is a mini FM transmitter built and powered using 2 transistors, designed by Tony van Roon. This small transmitter is simple to build and its transmissions could be picked up on any common FM radio. It possesses a range of approximately 1/4-mile (400 meters) or even more, depending on the line-of-sight, obstructions by big… Read More »
The following diagram is the circuit diagram of voice transmitter which use FM signal carrier to transmit the vioce signal to the FM receiver device. Components List: R1 = 4.7K R2 = 330 ohm C1 = 0.001uF (1nF) C2 = 10-40pF C3 = 4.7pF Q1 = 2N3904 L1 = see text Misc = Electret mike,… Read More »
The following diagram is the FM tracking transmitter based on 4 transistors. No additional notes for this tracking transmitter diagram, try to discover this circuit by yourself.. 🙂 Components list: R1 = 100K Ohms R2 = 10 Ohms R3 = 47K Ohms R4 = 220 Ohms C1 = 4.7uF/16V C2, C5 = 1nF C3 =… Read More »
This is an easy FM tracking transmitter circuit project :). The scheme designed by Tony van Roon, and here the FM transmitter tracker diagram: Components List: R1 = 10K C1 = 100uF/10V C2 = 10nF C3 = 4-40pF trimmer capacitor C4 = 4.7pF IC1 = LM3909 Q1 = 2N3904 NPN transistor LED1 = Red LED/or… Read More »
Simple and easy build of sensitive FM transmitter circuit. The circuit only requires 2 transistors to work. *L1 = 0.1 Uh, 6 to 8 turns of 22 ga. hookup wire close wound around a 1/4 inch diameter non-conductive core such as a pencil Circuit Notes: Typically the default for the capacitors model is ceramic, preferably… Read More »
This is probably become the simplest radio frequency RF transmitter that you will find anywhere. It has a total of five parts and can be constructed into a very small space. It is great for science fair projects or other science related projects where short range transmission is useful. It operates on 1.5 to 3… Read More »