The following diagram is the circuit diagram of simple 4W audio amplifier based TDA1013B. The amplifier is based on integrated audio amplifier chip, TDA1013B which is able to gained the audio power output up to 4W at 8 ohm loads.
Wide supply voltage range can be used for this circuit from 10VDC to 40VDC. Recommended supply voltage is 18V. You may use 0.5A – 1A transformer for the power supply circuit.
About TDA1020B:
The TDA1013B is an integrated 4W audio power amplifier with DC volume control , encapsulated in a 9-lead single in-line (SIL) plastic package. The wide supply voltage range makes this circuit ideal for applications in mains and battery-fed apparatus such as television receivers and record players.
The DC volume control stage has a logarithmic control characteristic with a range of more than 80 dB; control is by means of a DC voltage variable between 2 and 6.5 V. The audio amplifier has a well defined open loop gain and a fixed integrated closed loop. This device requires only a few external components and offers stability and performance.
TDA1013B Features:
Download the document of TDA1013B datasheet for 4W audio amplifier circuit reference:
This is the circuit diagram of power amplifier 45W using power uPC 1230 as the…
The Horn Circuit This is a basic circuit of car horn and lamp flasher that…
This is the circuit diagram of drinking water alarm based a small water sensor by…
Here is the 200W MOSFET amplifier powered based on four piece of IRFP250N, they are…
This is the 300W RMS stereo power amplifier circuit project. This amplifier is based four…
This is an active stereo tone control circuit using very well known op-amp IC of…
