This is the circuit diagram of 5VDC single polarity to 12VDC dual polarity converter based on IC LM2595-12 from National Semiconductor. This circuit will convert 5V DC single voltage (+) become 12V DC dual polarity output (+), GND, (-).
This is the circuit diagram of 3V to 9V DC converter which capable to deliver output voltage about 10.4v on no load and 9.6v @30mA. By using this circuit, You will be able to replace a 9v battery from 3V DC input.
Here the variable desktop power supply which will convert a high input voltage (12V) from the SMPS / PSU of a desktop computer into small output voltage (1.25 to 9 volts). This converter will be very beneficial for electronics hobbyists. An adjustable three-pin voltage regulator chip LM317T (IC1) is applied right here to deliver the… Read More »
Here is the schematic design of car cigar lighter to USB power port. Nowadays, almost all computer systems have logic blocks for working with a USB port. In practice, a USB port is capable of supplying more than 100 mA of continuous electric current at 5V to the peripherals which are hooked up with the… Read More »
This is the circuit diagram of DC to DC converter based LM2596, the circuit has a single input supply and multiple voltage outputs. The circuit has an input voltage range of 15V to 40V. It has 5 outputs: 3.3V at 1.5A; +12V and −12V at 50 mA each; and +5V and −5V at 50 mA… Read More »
This is the fixed 5V to 12V DC to DC converter. The circuit application converts input voltage of 5V (range 4.5V-5.5v) to 12V fixed regulated DC output. The circuit built based National regulator monolithic IC LM2586 which is specifically designed for flyback, step-up (boost), and forward converter circuit applications. The LM2586 will require a heat… Read More »
This is a 5VDC to 12VDC boost converter circuit built based LT1070. The LT®1070/LT1071 are monolithic high power switching regulators. They can be operated in all standard switching configurations including buck, boost, flyback, forward,inverting and “Cuk”. A high current, high efficiency switch is included on the die along with all oscillator, control and protection circuitry.
This is the circuit diagram of 6V to 12V DC to DC voltage converter (6V to 12V DC voltage doubler). This is the active circuit for voltage doubling from 6 volt to 12 volt DC with 1A maximum current. The IC is used as switcher device. Schematic diagram: Components and its usage: IC Switcher/regulator LM2577T-ADJ… Read More »