The following scheme is the clock generator circuit diagram which build based on NAND Gate logic IC. You may use IC 7400 or 4011 for this circuit. The 7400 is a Transistor-Transistor Logic (TTL) type, while 4011 is Complementary metal–oxide–semiconductor (CMOS) type. IC 4011 is cheaper than 7400 but the 7400 is faster than 4011.… Read More »
The following scheme diagram is the battery charger circuit for 6V Gel Cell battery type only. Components List: R1 = 22 ohm, 1W R2 = 270 ohm R3 = 220 ohm *R4 = 715 ohm, 1% *R5 = 3.57K, 1% *R6 = 1.40K, 1% *R7 = 1.47K, 1% C1 = 0.1uF, ceramic C2 = 0.1uF,… Read More »
The following diagram is the schematic diagram of 12V NiCAD battery charger with charging rate of 200mA/Hour. Components List: Resistor: 1 K Ohm, 68 Ohm, 2 K Ohm, Potensiometer 10K Ohm Diode: IN4001, 2x Zener IN752 Transistor: 2N2219, 2N2222
Here is the USB sound card circuit based on PCM2706 which dedicated for USB audio. With USB controller module inside PCM2706, there is no more additional programming to the IC. The computer system will automatically detect this circuit when connected to the USB port. You will get stereo audio channel output from this circuit. Schematic… Read More »
The following diagram is the circuit diagram of 20 band stereo graphic equaliser which will controlling the audio signal in specific frequency range. The power supply used for this circuit is symmetrical (dual polarity) type, 15V DC.
Here is a Hi-Fi power audio amplifier circuit, built with a power IC TDA2050. This circuit will produce a power output up to 32watt. With good sound quality, high power and very low distortion feature, this circuit will be very suitable for simple and cheap audio systems. TDA2050 Amplifier Schematic diagram: TDA2050 Amplifier PCB Design:
Here is the simple 2 x 30W audio amplifier with STK-465 power IC. Simple circuit with higher power output, this amplifier circuit is very easy to build. Just look at the PCB layout of this circuit.. 🙂 . The active component required is just the main power amplifier chip STK-465. Schematic diagram: This is a… Read More »
This is a 60W AF power amplifier based on single Sanyo integrated circuit STK-0060II. This circuit delivers 60W mono/single channel audio output. For stereo channel, you may build two identical circuits and of course doubled the power supply current (use 5A transformer for stereo application). The amplifier circuit uses symmetrical (dual polarity) power suppy. Recommended… Read More »
This is a class AB 6-10W audio power amplifier circuit which built using a TDA2002 or TDA2003 power amplifier IC module. These are replacements for the original LM383 which is no longer available. It is easy to build and has a minimum of external components. The module has both short circuit protection and thermal protection.… Read More »