This is a 18 Watt audio amplifier circuit based on power IC HA13118. The supply voltage required for this circuit is 8 – 18V DC, at least 1 to 2 Amps. Maximum output power will only be obtained with a power supply of 18V at greater than 2 A, using a 4 ohm speaker. The… Read More »
This is an amplifier circuit with gain music output power up to 7W. It uses IC TDA2003 as main component. This 7 watt audio amplifier circuit is small but powerful multi purpose amplifier. IC TDA2003 provides a high output current capability (up to 3.5A) very low harmonic and cross-over distortion.
This is 2x1W stereo amplifier circuit based on single IC KA2209. IC KA2209 is an equivalent IC to the TDA2822, you can use TDA2822 if you can’t find KA2209. It is ideal for battery powered operation since the supply required for this circuit is 2V to 9VDC. Power output depends critically on speaker resistance &… Read More »
This is 1W stereo audio amplifier with LM386N. The output power is 1 watt for each channel, so it should be use two ICs of LM386N National Semiconductor for stereo channel. This circuit belongs to kitsrus.com and the kit is available there or at electronickits.com. This circuit only need 10mA current with best voltage supply… Read More »
Flame, gas and smoke detector for fire alarm. You can combine this circuit with alarm circuit. The output will be the relay which switch on and switch off the alarm. Schematic diagram:
The following circuit is a simple fire alarm circuit based NE555 timer and use thermistor as a temperature detector. This sensor will activate the transistor when the temperature is in high value. The thermistor will have a low resistance at high temperature, while at low temperature, the transistor resistance is high. This characteristic of thermitor… Read More »
This is door knob touch alarm for your home security purpose. The alarm will be activated when someone touch the metal door knob. This circuit won’t work on full metal door.
This is the circuit diagram of emergency light included the alarm circuit to show you that there is no power source in your building due to shutted down or short circuit. When the electric in your home/company has been shutted down for maintenance and or shutted down due to short circuit, you may need this… Read More »
This is the circuit diagram of portable mic preamp. This circuit consumes low current supply (about 2mA), so will have a long battery life for supplying the circuit. Harmonic distortion is about 0.1% @ 1V RMS output for all frequencies. Maximum input voltage (level control cursor set at maximum) = 25mV RMS. Maximum input voltage… Read More »